Ready to spray means does not need to be reduced.
Can be used straight to the gun.
The procedure to use Ready to Spray is as Follows Shake stir with a paint stick.
Strain it right into the gun cup.
Use a gun with a 1.3-1.4 tip size.
Apply 2-3 medium wet coats or until covered.
Allow each coat to dry hand stick (dull) before going to the next coat.
A final mist coat can be used to make the metallic appear more even.
Do not solvent clean or sand in between coats of basecoat color.
Allow the basecoat to dry a minimum of 15 minutes to apply clear-coat.
